Wireless Controls & Automation
  Home Contact Shopping Cart   Site Map

 

 
   
 
 
.   Special relays  for Lighting controls, Pumps, Remote control driver, Two wire control, Memory circuit, Single shot

Special Function Circuit Driver
 
Latch - Toggle 934235
Set - Reset 934237
Memory relay 934139
Annunciator module  

Specifications:
Current drain: 10mA (unlatched), 60 mA (latched)
Relays switching 10A /  250VAC. AC-1, 4A AC-3
Power ON  indicator   DIN rail mount 
Operating temperature -4 to 131F  (-20 to 55C)


2 x 2.5 x 3.5 inches  ( 48 x 64 x 90 mm) 


 

 
Two Latch/Toggle


934235  12/24VDC   $99.99 

937236  120/240VAC  $99.99    

 Latch/Toggle
Two circuits in one unit


Momentary closure of S1, latch the relay. Q1 ON
  A subsequent momentary closure of S1
  will unlatch the relay Q1 OFF

Momentary closure of S2 will latch the relay. Q2 ON
 A subsequent momentary closure of S2
  will unlatch the relay Q2 OFF

Momentary closure of  I4 
  will reset both relays OFF

Auto reset on power loss

DIN Module



Two Set/Reset


934237  12/24VDC   $99.99 

937238 120/240VAC  $129.99    

 

Set - Reset 
Two circuits  in one unit


 Momentary closure of S1 will latch the relay. Q1 ON
  Momentary closure of S2 will unlatch the relay Q1 OFF

Momentary closure of S3
  will latch the relay. Q2 ON
 Momentary closure of S4
  will unlatch the relay Q2 OFF

Auto reset on power loss

DIN Module



Single ON/OFF
 Two pulse driver

934139  12/24VDC   $99.99 

 

 Memory relay driver  2 Wire driver

  On switch S1 closure sends the
   first pulse to latch the relay Q1  ON

 
When the switch S1 open, a second pulse
    will unlatch the relay 
Q1 OFF

  Auto reset on power loss

   Typical application:

 
 



937522 Set of supervision modules

For wireless controls 937442-7443-7444-7446

Operation:
The transmitter supervised module sends a status signal every 10 minutes as long as any input channel is energizes to verify the transmission, if the signal is interrupted by tampering, power loss or end of the input command, the receiver supervised module will turn OFF the corresponding channel relay output.

Specifications
Operating voltage 12/24VDC
Inputs DC 12 or 24VDC
Outputs Relay contact 8Amp, 240V Class 2 pilot duty
DIN rail mount 35mm

Transmitter 2 DC inputs, 2 off delay relay outputs

Receiver  4 DC inputs, 4 off delay relay outputs

NOTE:  output delay 10 minutes, factory set 

Output time can be customized by request

937522  Please Call for current price




Single ON/OFF

to TWO converter
 

934171  12/24VDC   $99.99 

934171  120/240VAC   $99.99 

 

Latching relay driver  3 Wire
Pulse when ON, Pulse when OFF


- On the closure of the switch S1 sends one
    500 ms pulse to output 1
- When the switch  S1 open, sends one
   500 ms pulse to output 2
   
 
Two separate outputs  500 ms pulse
  Auto reset on power loss

 




Contactors 30 A. 3 Pole    40 A. 3 Pole  
Power Calculator 

  Industrial control online selection

     Copyright    Electrodepot. All rights reserved