30 Amp. Power Relay - Momentary-to-Toggle (Bi-Stable) Switching

The LATCH module is an auxiliary device designed to allow easy and reliable arming/disarming momentary, two wire start stop circuit, or with hand-held wireless remote controls. It may be looked upon as an easy-to-use, cost-effective "momentary-to-toggle (bi-stable)" switching converter.
Momentary closure of the Yellow wires will latch the relay.
A subsequent momentary closure will unlatch the relay.
Reset the Toggle relay by removing power from supply
Note: The LATCH module is also suitable for similar performance of other remote control operations.
The relay provides N.O. 30 Amp. contact, and can therefore be used with a wide variety of control applications. Lighting and pumps. Wire directly into the receiver and field controls.
.

• The LATCH relay provides N.O.  Normally open contact
• Operating power - 12 VDC  
• Current drain - less than 1mA (unlatched), 90 mA (latched).
• Relays switching capability:
• 30 Amp. 220 V,  3 HP- 277 V ,  1.5 HP - 120V
• 20 Amp. Ballast
• 15 Amp. Tungsten
• 20 Amp. 28VDC
• Auto reset by power removal
• Encapsulated all weather housing  5.9x23.x1.8 inches  ( 150x82x46 mm )

Wiring: