|
|
Medium
Range Remote Digital Control System
1 Channel RECEIVER
2 Miles of Line-of-Sight range Up to 10 Miles with
Long Range Antenna
Over 64,000 Codes, Weather-Resistant Case, Power On and RF Activity
Indicators
Wiring Diagram
|
SPECIFICATIONS
Operating Voltage: 12 to 15.o VDC
Operating Temperature: -4° to
+140° F (-20° to +60° C)
Receiver Type: Digital Superheterodyne
Sensitivity: -118 dB (minimum)
Selectivity: 6 KHz
Carrier
Frequency: 27,255 MHz
Number of Codes: 65,536
Code Setting
Method: DIP switch programming
Data Input: Alarm, restore,
status, and low battery
Antenna Impedance: 50 Ohms
Quarter Wave Antenna
Optional
Dimensions: 4.25 in L x 2.5 in W x 6.25 in H (108 x 64 x 159 mm)
Weight: 1 lb. (0.454 Kg)
Current Drain: -25 mA, typical standby
65 mA alarm @ 12 VDC
Outputs: Alarm - form "C" relay per channel
Status exception - one open collector output per receiver;
Low Battery - one open collector output per receiver (Audio
and signal strength test points)
Output provides isolated N/0 and N/C
relay contacts
capable of switching a maximum of 1 Amp @ 32 VDC.
Power Relay
Latch Relay
The Low battery and status outputs are solid state switching
up to 50 mA @ 20 VDC to ground
Select Transmitter:
1 Ch Transmitter
4 Ch Transmitter
Optional Long Range Antenna
4Ch Handheld transmitter |
|
