|
Operating Frequency: |
315 MHz |
|
Data Format: |
DX
format |
|
Number of Codes: |
1,048,575 |
|
Channels: |
ONE
channel |
|
Measured Range: |
700 feet
in one quadrant with 1Ch
4Ch 8Ch
Door/Win transmitter; 500 feet in open
air (four quadrant test) |
|
Operating Temperature: |
32° to
140° F (0° to 60° C) |
|
Sensitivity: |
-95 dBm
(typical) |
|
Number of Stored Transmitter Codes: |
32 per
receiver |
|
Receiver Output: |
For "C"
relay contact, 1 amp, at 32 VDC per channel |
|
Field Selectable Receiver Output Modes: |
Momentary, four seconds (factory set)
Momentary, one second
Flip-flop toggle
latch, 2-Channel |
|
MODE
BUTTON (one per channel)
|
| Learn
Mode: |
Press
and release to enter learn mode |
Transmitters
Learned: |
Press
and hold for five seconds after the last LED flash to delete all
transmitters on an associated channel |
| Erase
Memory: |
Press
and hold for five seconds after the last LED flash to delete all
transmitters on an associated channel |
| Clear
Latch: |
Press
and release |
Clear
Low
Battery: |
Press
and release mode switch on channel 2 (DXR-702 only) to clear low
battery |
|
LED
INDICATOR
|
|
Steady: |
Indicates "learn" mode |
|
Flashing: |
Indicates number of transmitters learned on the selected channel |
| RF
Activity: |
Blinks
synchronously with detected RF activity |
|
Antenna: |
Wire
lead |
|
Input Impedance: |
75 Ohm -
2:1 VSWR |
|
Operating Voltage: |
11 to
17.5 VDC - 12 to 16 VAC |
|
Current: |
25 mA at
standby at 12 VDC
60 mA in alarm at 12 VDC |
|
Connectors: |
Screw
terminal,+,-, with N/O, N/C, and common per receiver channel |
|
Dimensions: |
5.5 in L
x 1.25 in W x 4 in H (140 x 32 x 102 mm), excluding antenna |
|
Accessories: |
Mounting
bracket, screws, and anchors (supplied) |
|
Regulatory Requirements: |
FCC and
DOC |
