|
934135
|
10 AMP. Momentary-to-Toggle (Bi-Stable) Switching Converter
The
LATCH
module is an auxiliary device designed to allow easy and reliable arming/disarming momentary, two wire start stop circuit, or with hand-held wireless remote controls. It may be looked upon as an easy-to-use, cost-effective "momentary-to-toggle (bi-stable)" switching converter.
Momentary closure of the terminals
2 and 5 will latch the relay.
A subsequent momentary closure of the contacts will unlatch the relay.
Reset the Toggle relay by removing power from terminal
2 or 10
Note: The LATCH module is also suitable for similar performance of other remote control operations.
The relay provides N.O. and N.C. contacts, and can therefore be used with a wide variety of control applications
Specifications and
Features
-
Output
LATCH relay provides N.O. and N.C.
contact
-
Operating power - 12 , 24 VAC/DC
and 120, 220 VAC
-
Current drain - less than 10mA
(unlatched), 90 mA (latched).
-
Relay switching capability:
-
10 Amp. 220 V, 1.0 HP- 277 V, 0.5
HP - 120V
-
8
Amp. Ballast
-
8 Amp. Tungsten
-
Auto reset by power removal
-
17.5 mm DIN-rail housing
-
Environmental
Storage Temperature: -23°C to 70°C,
Operating Temperature: -20°C to 60°C
|
 |
LED indication time status and
power supply
A1 & A2
Operating Voltage:
12 to 240 VAC or VDC
Start Switch Closure Time: 20 milliseconds
minimum
Power Consumption:
0.7 to 3VA. AC, 0.5
to 1.7 W. DC
|
|
|
Cart
