| Model: 934121 |
 |
.
|
|
Momentary to single shot Electronic Converter
Used to send one one pulse only in the event of a contact closure
When the coil is energized the main contacts will close for 3 seconds
and open again until a new contact closure occurs.
Use full for the activation or pulse transmission in wireless remote
controls.
The relay provides N.O. and N.C. contacts, and can
therefore be used with a wide variety of control applications
Features - Specifications
-
Replaces the normal ON
to one
pulse circuit.
- Momentary or continuous closure
sends one pulse of 3 seconds
-
Operating power - 12 - 24 VDC 10%.
-
Current drain - less than
0.01mA
(pulse),
30 mA 3 seconds adjuatable-
Relays
switching capability – 1
0
A 125 VAC SPDT.
- DIN
mount
|
 |
Operation: Upon momentary or maintained power application to the
coil the output contact is energized for the interval time. At the end
of the delay the output de-energizes. Reset occurs when the time
delay is complete.
New pulse allowance 10 seconds
|
|
1
Channel Transmitter