|
|
 |
Wireless
Controls:
Long Range Remote Control, field operations, irrigation,
lighting, parks, gates, solar, water pumps, greenhouses,
remote monitoring, hazardous areas, trucks, boats, fuel
stations, telecommunications, security, etc
Up to 10 miles
of line-of-sight range Wireless controls RF frequency: 27.255 MHz Up
to two miles of line-of-sight range with handheld devices Over 64,000
codes Code Setting Method: DIP switch programming
Complete RF supervision, field enabled, Fully supervised (loop status,
low battery, link integrity)
Loop Response Time: 500 msec
APPLICATIONS
 |
937001
Receiver 1-Channel. When the receiver detects a signal from its
companion transmitter, it will verify the digital code, activate the
correct output channel, and trigger the remote device connected to
the receiver. Weather-Resistant Case
|
937001
|
|
|
937004
Receiver 4-Channel. When the receiver detects a signal from its
companion transmitter, it will verify the digital code, activate
the correct output channel, and trigger the remote device
connected to the receiver. Weather-Resistant Case
|
937004
|
 |
937016
Receiver 16-Channel. When the receiver detects a signal from its
companion transmitter, it will verify the digital code, activate
the correct output channel, and trigger the remote device
connected to the receiver.
|
937016
|
|
|
937101 Stationary 1-Channel Transmitter . When triggered
with an external switch, the transmitter will send a
digital encoded, FSK modulated, signal to its companion
receiver. The receiver will verify the digital code, activate
its output, and trigger the remote device.
Antenna not supplied ( to order)
|
937101
|
|
|
937104 Stationary 4-Channel Transmitter . When triggered
with an external switch, the transmitter will send a
digital encoded, FSK modulated, signal to its companion
receiver. The receiver will verify the digital code, activate
its output, and trigger the remote device.
-
RF transmit LED
-
Accepts N/O or N/C inputs
-
4.25 W x 6.25 H x 2.5 D
Antenna not supplied ( to order)
|
937104
|
 |
937202 Portable
Transmitter
2 Channels
Configurable as
stationary transmitters.
Up to two miles of
line-of-sight range.
configurable as
2-button panic
transmitters.
configurable as
2-channel continuous
output transmitter
Includes belt clip.
Antenna 7in included
Code Setting: DIP switch programming
Dimensions: 2.5in W x 5.5
in H x 1.30in D
Powered by two 9V
batteries (supplied)
|
937202
|
 |
937204 Portable Transmitter
4 Channels
Configurable as
stationary transmitters.
Up to two miles of
line-of-sight range.
configurable as
4-button panic
transmitters.
configurable as
4-channel continuous
output transmitter Includes belt clip.
Antenna
7in included
Code Setting: DIP switch programming
Dimensions: 2.5in W x 5.5
in H x 1.30in D
Powered by two 9V
batteries (supplied)
|
937204
|
 |
937088 Antenna
for transmitters or receivers
Eight-inch rubber duck
style Antenna
50 ohm UHF connector
included
.65 W x 9 H x .65 D
inches |
937088
|
 |
937099
Antenna
for
transmitters or receivers
Three-foot whip style 50
ohm
9 feet of coax cable
included
U bolt included for post
mounting
2.25 W x 39 H x 2 D |
937099
|
 |
931222
12VDC
Power adaptor
12VDC, 2000 mA
120 VAC input |
|
 |
12 Amp Power relay
277 VAC SPST
General purpose
12VDC coil 60 mA.
Plug-in relay and DIN mount |
931212
|
 |
Momentary-to-Toggle (Bi-Stable) Switching
Converter - Latch
The LATCH module is designed to arming/disarming
momentary, two wire start stop circuit, or with wireless remote controls.
Momentary closure will latch the
relay.
A subsequent momentary closure will unlatch the
relay.
The relay provides
N.O. and N.C. contacts, |
934757
|
|
|
Single shot control relay
Replaces the normal ON
to
one pulse circuit.
Momentary or continuous closure sends one pulse
of 3 seconds (adjustable)
Operating power - 12
, 24 VDC
Current drain - less than 0.06mA (pulse),
30 mA,
3 seconds adjustable
Relays SPDT. 10A. 125 VAC |
934121
|
|
Scenery, lighting, event and time control with manual override |
Note: The
applications shown here are referential help examples only,
and are
not intended for actual constructions plans
Contact a licensed professional. Electrodepot assumes no responsibility of the use of this
drawings |
APPLICATIONS
Pumps,
Conveyors,
Gates,
Doors,
Lights,
Actuators,
Valves,
Packing,
Emergency,
Boats,
Vessels,
Beacon lights,
Navigation Aid,
Traffic control,
Retail
Stores,
Restaurants,
Laboratories,
Lighting,
Irrigation,
Parking lots,
Security,
Warehouses,
Access control,
Telecommunication,
Electronic controls,
Solar power sites
|
E-Mail
