PROCESS CONTROL RO-4 Radio Frequency (RF) Receiver with Four Universal Outputs duplicates point information received from up to four different transmitters. Each of the output points may be individually configured for an SPDT contact output or an analog output of 0-20 mA or 0-10 VDC. There is no RF tuning, no external RF antenna, and no specific radio experience required to install or use the system. The RF signal uses proven spread-spectrum technology, and has an open-air range of 2700' (823m).

Eliminates wiring Four universal output points Spread-spectrum technology No FCC license required 200' to 500' (61 to 152m) in-building range 2700' (823m) open-air range 923 MHz RF carrier No external antenna required 50 addresses per facility Made in USA  Extended range upon request Transmitter Diagram   -   Receiver Diagram Universal Output Supply power 24 VAC/DC ±10% @ 500 mA Outputs (4) Selectable digital or analog Digital SPDT 10A @ 120 VAC   Analog 0-20 mA, 0-10 VDC   Sensor 4-20 mA, 2-10 VDC Impedence <650ohm mA, >10ohm V D/A resolution 12-bit converter LBI option SPST low battery indicator Ambient temp 14° to 140° F (-10° to 60° C) Ambient RH 5% to 95% RH noncondensing Connection Terminal screws Housing NEMA 4, plenum rated Weight 2.0 lb (0.91kg) Dimensions 4.3"W x 7.0"H x 3.5"D (10.9 x 17.8 x 8.9 cm) Radio Frequency 923.58 MHz Receiver  sensitivity -110 dBm Modulation Direct sequence, spread spectrum Data rate 19.2 KBPS Antenna Built into circuit board Approvals FCC CFR part 15.247 Address Structure Facility address code Unique for each system Transmitter address 50 addresses per system @ 30 sec intervals Number of receivers Unlimited Four points May receive from any transmitter and point within the facility address code 4Ch analog/digital Tx    Power Supply    View Cart