Wiring Diagram
Antenna
not supplied
Select Antenna
Required
Whip
8" Antenna
or Long Range Antenna
|
Required
Whip
8" Antenna or Long Range Antenna SPECIFICATIONS
| Output |
100 mA @12VDC |
| Operating
Voltage: |
12 to 15.o VDC |
| Operating
Temperature: |
-4° to +140° F (-20° to +60° C) |
| Receiver Type: |
Digital Superheterodyne |
| Sensitivity: |
-118
dB (minimum) |
| Selectivity |
6
KHz |
| Carrier
Frequency |
27,255 MHz |
| Number of Codes: |
65,536 |
| Code Setting
Method |
DIP switch programming |
| Data Input |
Alarm, restore, status, and low battery |
| Status Exception |
Time Frame: Four hours |
| Antenna Impedance |
50 Ohms Quarter Wave Antenna
NOT INCLUDED |
| Dimensions: |
7.9 in L x 1.25 in W x 6.5 in H (201 x 32 x 165
mm) |
| Weight |
1.5 lb. (0.680 Kg) |
| Current
Drain |
25
mA, typical standby 65 mA alarm @ 12 VDC |
| Outputs: Alarm |
form "C" relay per channel |
| Status
exception |
one open collector output per receiver; |
|
Low Battery |
one open collector output 50 mA @ 20 VDC to ground |
16 outputs
are all low current (100mA at 12VDC)
Optional:
|
